Product Information
SKU:
SPEEDSTOPTAYCAN
For Porsche Taycan, 992 cars testing. While car drive test is possible to stop (freeze) odometer counting.
Plug and Play device with easiest connection way possible, no soldering is required in the installation process.
- Porsche Taycan 2019+
- Porsche 911 (model 992) 2019+
Plug and Play device with easiest connection way possible, no soldering is required in the installation process. Remove instrument cluster upper cover. Disconnect cluster grey connector and remove plastic cover from connector. Now put this cover on SPEEDSTOP female connector. SPEEDSTOP male connector connect to car cluster connector - check twice connectors orientation - on both connectors one side have trail. Use additional cable ties for fixing connectors.
Activation can be done in 3 ways:
- with Return button - push quickly 3 time;
- with High Beam switch - push quickly 4 time;
- with ACC Cancel switch - push quickly 4 time;
Using SPEEDSTOP on Porsche: (hazard indicator on speedometer blinks every time when working mode are changed):
MODE1 - Push 3x Return button (hazard indicator on cluster blinks 1 time) = Odometer freezed, Speedometer works normal;
MODE2 - Push 3x Return button (hazard indicator on cluster blinks 2 time) = Odometer count 10%, Speedometer works normal;
MODE3 - Push 3x Return button (hazard indicator on cluster blinks 3 time) = Odometer count 10km after 100km of drive test, Speed indicator show 10% of actual speed ;
Back to nornal operation MODE - Push 3x Return button (hazard indicator on cluster blinks 4 time) = back to normal mode, Odometer and Speedometer works normal.
After Ignition OFF/ON SPEEDSTOP keeps selected working mode.
If you remove SPEEDSTOP adapter after test drive, odometer not changing.
