2) New program - VOLVO SCL 2
Application: SCL/ESL signal exchange
Supported cars:
C30, S40 II, V50, C70 II
Available in:
Julie PRO, Julie VOLVO SCL 2
Version 118
BMW
1) New program - BMW 5
Application: BMW F series (CAN) and E series* (CAN) cars.
*Except BMW X3 (E83)
Engine + EGS replacement (8 HP automatic transmission)
Replacing the engine only
Exchange only for EGS
Example models:
F20, F30, F48, E70, E71, E90
Additionally, the original (donor) car must meet the following requirements:
Must be equipped with one of the following modules: EWS4 / CAS / FEM
- The ISN in the ECU content must be 16 bytes
- ISN whose EGS content must be 16 bytes (optional - if your project requires it)
Attention:
The procedure DOES NOT WORK if the recipient's car is equipped with the EWS4/CAS/FEM module.
Available in:
Julie PRO, Julie LITE, Julie BMW
2) New program - BMW 4
This program is dedicated to BMW E series cars (CAS-BUS) and can be used for the following purposes:
Replacing the damaged ECU
Available in:
Julie PRO
Version 117
Renault/Dacia/Nissan
1) New program - Password Renault ISK
Function: Use Julie to read the ECU values required to calculate the ISK password.
You can combine this procedure with our service - Renault ISK Code Calculation - to get the ISK code for your ECU!
Supported ECUs:
Bosch MD1CS006,
Bosch EDC17C84
Continental EMS3161,
Continental EMS3160,
Continental EMS3155,
Continental EMS3150,
Continental EMS3141,
Continental EMS3140,
Continental EMS3125,
Continental EMS3120,
Continental SID321,
Continental SID310,
Continental SID309,
Continental SID307.
Available in:
Julie PRO, Julie LITE, Julie RENAULT NISSAN
Mercedes
1) ESL/ELV replacement – new models added!
Supported models:
W176, W204, C207, W212, W246 - Available from Julie PRO
W169, W245 - Available in Julie PRO, Clixe MERCEDES | ESL/ELV
Version 116
PSA Group
1) New program - PSA Automatic
Application: Fully automatic procedure that can be used in the following ways:
- Setting the ECU PIN - to encode keys or match the ECU to the car.
- IMMO OFF with emulator
The procedure should be completed by connecting the ECU on the workbench. Just connect the Emulator to the ECU according to the pin arrangement given in the user manual.
The emulator will automatically determine the ECU PIN CODE or replace the immobilizer signal.
The procedure may take from 3 to 90 hours. The end of the procedure will be signaled by a blue LED on the Emulator.
Supported ECUs:
Bosch EDC17C60, MD1, MD1CS003, MG1CS032, MG1CS042
Continental VD56.1
Delphi DCM7.1A
Valeo VD56.12
Available in:
Julie PRO, Julie LITE, Julie PSA
Version 115
VAG Group
1) WFS5/MQB platform - universal solution for Bentley/Bugatti/Lamborghini/Porsche
ECU + TCU authorization
2) New Supported ECU - Bosch ME17.1.6 (Bentley)
Available in:
Julie PRO, Julie LITE, Julie VAG
TACHO and AIRBAG solutions
1) Version 115 is the last version of Julie with TACHO and AIRBAG solutions. They will no longer be supported.
Version 114
VAG Group
1) WFS5/MQB Platform - Universal solution for Audi/Seat/Skoda/Volkswagen
