Shopping Cart
There are no more items in your cart
The FCOM value settings module allows you to change the mileage shown on the instrument cluster to any desired value. The function is very easy to use: connect via the OBD2 connector to the instrument cluster, select coding functions -> Direct odometer change and enter the desired value. Everything is done via the OBD2 connector, there is no need to open the controllers or solder anything.
Note: It is not possible to change the value settings via the OBD2 connector if your car is not on the list and was manufactured before the models listed below (e.g. Mondeo 2001-2006, Focus up to 2003, etc.). Older instrument panel modules do not have direct access to memory via the OBD2 connector.
| Brand | Model | Years | Manufacturer | Memory |
|---|---|---|---|---|
| Ford | C-Max | 2003 (3M5T) | Visteon | HC912XXX |
| Ford | C-Max | 2003-2006 (4M5T) | Visteon | MC9S12H256 |
| Ford | C-Max | 2007-2010 (7M5T) | Visteon | HC912XXX |
| Ford | C-Max | 2007-2010 (8V4T) | Visteon | MC9S12XHZ512 |
| Ford | Fiesta | 2006-2007 (6S6T) | Visteon | HC912XXX |
| Ford | Fiesta | 2008- (8A6T) | Visteon | HC912XXX |
| Ford | Focus | 2003 (3M5T) | Visteon | HC912XXX |
| Ford | Focus | 2003-2006 (4M5T) | Visteon | MC9S12H256 |
| Ford | Focus | 2007-2010 (7M5T) | Visteon | HC912XXX |
| Ford | Focus | 2007-2010 (8V4T) | Visteon | MC9S12XHZ512 |
| Ford | Focus | 2010 (AM5T) | JCI | Renesas/NEC uPD70F3425 |
| Ford | Focus | 2011- (BM5T) | JCI | Renesas/NEC uPD70F3425 |
| Ford | Galaxy | 2006 (6M2T) | Visteon | HC912XXX |
| Ford | Galaxy | 2006 Convers+ (6M2T) | Visteon | 24C16 |
| Ford | Galaxy | 2007 (7M2T) | Visteon | HC912XXX |
| Ford | Galaxy | 2007 Convers+ (7M2T) | Visteon | 24C16 |
| Ford | Galaxy | 2008-2010 (8M2T) | Visteon | HC912XXX |
| Ford | Galaxy | 2008-2010 Convers+ (8M2T) | Visteon | 24C16 |
| Ford | Galaxy | 2010 (AM2T) | Visteon | HC912XXX |
| Ford | Galaxy | 2010 Convers+ (AM2T) | Visteon | 24C16 |
| Ford | Kuga | 2007-2010 (8V4T) | Visteon | MC9S12XHZ512 |
| Ford | Mondeo | 2006 (6M2T) | Visteon | HC912XXX |
| Ford | Mondeo | 2006 Convers+ (6M2T) | Visteon | 24C16 |
| Ford | Mondeo | 2007 (7M2T) | Visteon | HC912XXX |
| Ford | Mondeo | 2007 Convers+ (7M2T) | Visteon | 24C16 |
| Ford | Mondeo | 2008-2010 (8M2T) | Visteon | HC912XXX |
| Ford | Mondeo | 2008-2010 Convers+ (8M2T) | Visteon | 24C16 |
| Ford | Mondeo | 2010 (AM2T) | Visteon | HC912XXX |
| Ford | Mondeo | 2010 Convers+ (AM2T) | Visteon | 24C16 |
| Ford | S-Max | 2006 (6M2T) | Visteon | HC912XXX |
| Ford | S-Max | 2006 Convers+ (6M2T) | Visteon | 24C16 |
| Ford | S-Max | 2007 (7M2T) | Visteon | HC912XXX |
| Ford | S-Max | 2007 Convers+ (7M2T) | Visteon | 24C16 |
| Ford | S-Max | 2008-2010 (8M2T) | Visteon | HC912XXX |
| Ford | S-Max | 2008-2010 Convers+ (8M2T) | Visteon | 24C16 |
| Ford | S-Max | 2010 (AM2T) | Visteon | HC912XXX |
| Ford | S-Max | 2010 Convers+ (AM2T) | Visteon | 24C16 |
| Ford | Transit | 2006-2007 (6C1T) | JCI | Renesas/NEC uPD70F3325 + 93C76 |
| Ford | Transit | 2008 (8C1T) | JCI | Renesas/NEC uPD70F3325 + 93C76 |
| Ford | Transit | 2009-2011 (9C1T) | JCI | Renesas/NEC uPD70F3325 + 93C76 |
Important note: To use the FCOM value setting module, you must already have the FCOM diagnostic interface (supplied with the FCOM software). If you don't have FCOM yet, order it from us.
Legal notice
The FCOM value setting module allows you to change the car's mileage in both directions, up and down. This feature is useful in many situations (usually when replacing an instrument cluster or engine), however it can also be used for odometer/mileage changes (rollbacks), which are considered fraudulent in many countries (usually when a vehicle seller falsely states the actual mileage vehicle to the buyer). FCOM users are prohibited from using the odometer correction feature for fraudulent purposes. If this feature is not permitted by the laws of your country, you must not purchase or install the FCOM module.
o-focom
999 Items
New
No reviews
Tap to zoom
