Product Information
SKU :
FLK02
Device designed for people who want to start their adventure with MagicMotorSport products
The device is without software!
When you buy them, you have to buy a module to make the device work on itself.
If you don't buy the module, the device won't work! You can't do anything about it.
Modules available for purchase
- FLS0.1M – Software Flex ECU OBD + Bench – MASTER
- FLS0.2M – Software Flex TCU OBD + Bench – MASTER
- FLS0.3M – Software Flex Motorola MPC5xx – MASTER
- FLS0.4M – Software Flex Nexus MPC5xxx – MASTER
- FLS0.6M – Software Flex Renesas SH7xxxx – MASTER
- FLS0.9M – Software Flex NEC 76F00xx – MASTER
- FLS0.10M – Software Infineon TC17xx - MASTER
Subscription, which is included in the price of the set (1 year) is counted from the moment of activation of the first module.
The device can operate such vehicles as motorcycles, passenger cars, vans, buses, trucks, tractors, working machines, boats. It all depends on the module purchased.
In the set FLEX flk02 you will find:
- x1 FLX3.5 - Cable set: colour coded cable bundle
- x1 FLK4.2 - Set of adapters: 6 pcs Pin adapters
- x1 FLX1.1 - FLEX Base Module
- x1 FLX1.9 - FlexBox Module for the FLEX device
- x1 FLX2.10 -OBD connection cable: FLEX to CAN/Kline RED
- x1 FLX2.11 - OBD connection cable: FLEX to ENET GREEN
- x1 FLX3.9 - USB 2.0 AM-BM BLK 1.8m connection cable
- x1 FLX4.9 - Power supply 110-240V 14V 5A
- x1 FLX3.3- FlexBox connection cable port C to NEC 7F00 XX
- x1 FLX3.4 - FlexBox connection cable port D to BDM MPC5xx
- x1 FLX4.1 - FlexBox port E 40 pin adapter for FLX3.5
- x1 FLX9.1 - Flex & FlexBox diagnostic adapter
FLEX is an innovative tool for automotive workshops that fully supports the latest developments in automotive tuning and repair. Be more productive and take your business to the next level with this new, configurable technology.
Both FLEX and MagPro2 x17 have
- an expanded list of vehicles,
- interactive instruction manual,
- user-friendly interface,
FLEX -a will be connected via OBD2, on the table (on the bench) and by opening the controller and soldering into specific points
FLS0.10M – Software Flex Infineon TC17xx – MASTER
The software allows you to connect Bosch MEDC17 drivers to the FLEX programmer without having to open the driver.
With the Full Bench MEDC17 software package, your data will always be safe and reliable. You'll have a full backup (without having to open the device) in case you need to restore the ECU to its original condition.
List of supported vehicles
FLS0.1M – Software Flex ECU OBD + Bench (car, bike, van)
OBD and Bench protocols are collected in this module. If you have MAGP1.2M/S, MAGP1.12M/S (X17), this protocol is completely free. Contact sales department via chat on www.magicmotorsport.com or send email to info@magicmotorsport.com to buy OBD/Bench protocols for ECU (car, bike, van) (FLS0.1 M/S).
List of supported vehicles
FLS0.2M – Software Flex TCU OBD + Bench – MASTER
The module allows you to fully read and write the gearbox memory without the need for encryption. Not only does this software not require you to open the controller, but it provides exactly the same functions as in normal boot mode. Tweaking, aligning, bypassing security and restoring backups are no problem. The difference is the lack of file encryption, while improving the speed of the device at the same time. What's more, you don't have to make any ignition switches as the Flexbox takes care of this. Read times have been tested in a total of 2 to 3 minutes, depending on the TCU model. The save time depends on the actual size of the modification in the file, from a few seconds to about 9 minutes.
List of supported vehicles
FLS0.3M – Software Flex Motorola MPC5xx – MASTER
The software package for the Flex BDM MPC5XX enables full ECU read and write. The protocol is much faster than any other BDM tool on the market, especially since it was designed for brand new hardware. Tuning, pairing and restoring a backup is no problem and can be done in seconds. Read and write times have been repeatedly tested on various ECU models.
If you own the MAGP1.16 BDM MPC5xx plugin, then this new protocol is completely free for you. Owners of the previous BDM tools (MAGP1.11 and MAGP1.14) will also get it for free.
List of supported vehicles
FLS0.4M – Software Flex Nexus MPC5xxx – MASTER
The Flex BL Nexus MPC5XXX SW package allows for full read and write memory in the ECU. Increased programming speed compared to X17 and implementation of protocols for the latest generations of Marella, Continental and many other brands.
If you have MAGP1 .2M/S, MAGP1.12M/S (X17) or MAGP1.5M/S (T-BOOT), this new protocol is completely free.
List of supported vehicles
FLS0.6M – SW Flex Renesas SH7xxxx – MASTER
Renesas processors are usually found in Japanese control units and are more common in Japanese vehicles than in their Western counterparts. The most famous of the family are the SH705x and SH725xx, which have been widely used since 2005 to the present day. Denso is the ECU manufacturer that widely uses Renesas processors.
OBD and bench protocols allow full access to the ECU: both the internal flash and the internal EEPROM can be fully read and written as a backup file for cloning and restoring purposes, and Flex allows direct reading and writing of maps (as well as calculating the checksum for all tuning enthusiasts).
List of supported vehicles
FLS0.9M – Software Flex NEC 76F00xx – MASTER
The Flex AUD for the NEC 76F00xx SW package enables full readout and full write of the ECU, including any memory stored inside the control unit without encryption. Other tool makers may call this protocol the JTAG NEC 76F000xx. This protocol is extremely fast and is very important in everyone's daily work because it focuses on the largest car seller in the world - the Toyota Group.
Tweaking, cloning, and restoring your backup is no problem and can be done.
If you are a previous owner of MAGP1.2 or MAGP1.12 (X17), this new protocol is completely free. Anyone else can contact sales to purchase this protocol.
List of supported vehicles
