Product Information
SKU:
SPEEDSTOP32
For Volkswagen, Skoda, Seat cars drive test or dyno test. While car drive test is possible to stop (freeze) odometer counting.
Plug and Play device with easiest connection way possible, no soldering is required in the installation process.
- VW Caddy Typ 2K0 2K5 2012+ with 32pin instrument cluster connector;
- VW Golf 6 Typ 5K0 5K6 2009+ with 32pin instrument cluster connector;
- VW Passat B7 3C 2010+, Typ 3AA-2015;
- VW Jetta Typ 5M, 5C 2010+;
- VW Touran II Typ 1T 2011-2015;
- VW Tiguan Typ 5N 2011+ with 32pin instrument cluster connector;
- VW Transporter, Multivan, T5, T6 Typ 7E 2011+ with 32pin instrument cluster connector ;
- Seat 2009-2013 cars with 32pin instrument cluster connector ;
- Skoda 2008-2013 cars with 32pin instrument cluster connector ;
How to install:
Plug and Play device with easiest connection way possible, no soldering is required in the installation process. Remove instrument cluster. Disconnect cluster blue connector and swap blue cover. Now connect SPEEDSTOP female connector to cluster - check position of pin1. SPEEDSTOP male connector connect to car cluster connector - check twice connectors orientation. Use additional cable ties for fixing connectors.
Activation with OK button or High Beam handle
The cruise control and other assistance systems works fine in all MODES;
The speedometer show actual speed - divided by 10 in Mode1 and by 2 in Mode2),
Odometer turns slower - after 100km drive test odometer will turn 10km in Mode1 and 50km in Mode2 .
Using SPEEDSTOP on VW cars: (hazard indicator on speedometer blinks every time when working mode are changed):
- Mode1: Push 3x OK button or 4x High beam light switch (hazard indicator on cluster blinks 1 time) = Odometer freezed (after 100 km will turn 10 km) , Speedometer show actual speed divided by 10 - use digital speedometer;
- Mode2: Push 3x OK button or 4x High beam light switch (hazard indicator on cluster blinks 2 time) = Odometer freezed (after 100 km will turn 50 km), Speedometer show actual speed divided by 2;
- Push 3x OK button or 4x High beam light switch (hazard indicator on cluster blinks 4 time) = back to normal mode, Odometer and Speedometer works normal.
After Ignition OFF/ON SPEEDSTOP keeps selected working mode.
If you remove SPEEDSTOP adapter after test drive, odometer not changing.
