Set08-SKU81.1-BMW-Explorer basic and module Read\Write calibrations MDG1 and EGS 8HP

Infomacje o produkcie:

SKU:

SKU81.1

Bmw-explorer basic Interface +

Module Read/Write calibrations DDE/DME F and G series MDG1 and EGS 8HP

DDE802, DDE803, DDE832, DME840, DME840H, DME841, DME841H, DME83T1, DME84T0, DME84T1, DME860, DME861, DME880, DME88T0, DME8C0, DME8CT0, MEVD17_2, MEVD17HY, MEVD172G, MEVD172P, MEVD172S, MEVD172U, MEVD172Y, MEVD172Z, MEVD1723, MEVD1724, MEVD1725, MEVD1726, MEVD1728, MEVD1728, DDE73, DDE701, DDE721, DDE731, DDE741, DDE751.

EGS (GSB231, GSB23TU, GSZFB1, GKEG3HY, GKEHY23)

The module supports virtual and physical reading of calibrations from DME / DDE with Motorola MPC5777 and Tricore TC298 processors.

Calculation and recovery of CRC and CVN control units.

Fixed CRC offline

Reading/Writing is done via the OBD connector.

F- series

B48 B38 DME841, DME83T1, DME84T1 MEVD1723 F20, F21, F22, F23, F30, F31, F32, F32, F33, F34, F35, F36, F45, F46, F48, F49, F55, F56, F57, F60

B48 DME841H B48B20A F30, F31, F32, F32, F33, F34, F35, F36

B58 DME861 B58B30A F20, F21, F22, F30, F31, F32, F34, F35, F36

G-series

B46 DME840 B46B20B G30, G31, G32, G11, G12, G01

B48 DME840 B48B16A G01,G30, G31

B48 DME840H B48B16A G01,G30, G31

B58 DME860 B58B30A G01, G11, G12, G30, G31, G32

N63 DME880 N63B44C G11, G12

N63 DME880 N63B40B G12

N74 DME8C0 N74B66B G12

N74 DME8CT0 N74B68A Phantom RR11, Phantom EWB RR12 DME

B48 DME840H B48B20B G30, G38, G11, G12

S63 DME88T0 S63B44B F90 M5

B47 DDE802 B47D20A G30, G31, G01

B57 DDE832 B57D30A G30, G31, G32, G11, G12, G01

This kit is sufficient for a full-fledged chip tuning of BMW G-series vehicles equipped with B series motors