Product Information
SKU:
DNTFCAV3
It provides the capability to temporarily suspend (freeze) the odometer during car testing, preventing the accumulation of additional mileage.
For more information, please visit the official product website: Dynotest
Device:
It is not intended to be used on public roads.
It is not intended for registered cars.
The Plug&Play technology eliminates the need for soldering during installation.
Information about the operation modes of the device on FIAT Tipo cars:
You will hear sound signal each time when the device switches between modes.
Mode 1
Press "RES" button 4 times.
You will hear sound signal once.
The mileage block function will be not active.
Speedometer will display actual speed.
Mode 2
Press "RES" button 4 times.
You will hear sound signal twice.
The odometer will register 50 km for every 100 km driven.
Speedometer will display actual speed.
Mode 3
Press "RES" button 4 times.
You will hear sound signal three times.
The odometer will register 10 km for every 100 km driven.
Speedometer will display actual speed.
Mode 4
Press "RES" button 4 times.
You will hear sound signal four times.
The mileage block function will be FULL active.
Speedometer will display actual speed.
Important for successful installation and use:
- During device connection/disconnection, the ignition must be turned off
- Switching between modes should be done on a stationary car
- When the device is in use, the selected mode will be retained (saved) after the ignition is turned off/on
Other, alternative product names searched for:
Mileage Blocker, Mileage Stopper, Odometer Stopper, Odometer Blocker, Mileage Correction, CAN Filter, CAN Blocker, Mileage Freezer, Odometer Freezer, CAN Freezer.
