DNTMBV1 - Dynotest Mileage Blocker Mercedes V-Class W447 2015-2022 (Multicolor)
DNTMBV1 - Dynotest Mileage Blocker Mercedes V-Class W447 2015-2022 (Multicolor)
DNTMBV1 - Dynotest Mileage Blocker Mercedes V-Class W447 2015-2022 (Multicolor)
DNTMBV1 - Dynotest Mileage Blocker Mercedes V-Class W447 2015-2022 (Multicolor)
DNTMBV1 - Dynotest Mileage Blocker Mercedes V-Class W447 2015-2022 (Multicolor)
DNTMBV1 - Dynotest Mileage Blocker Mercedes V-Class W447 2015-2022 (Multicolor)
DNTMBV1 - Dynotest Mileage Blocker Mercedes V-Class W447 2015-2022 (Multicolor)
DNTMBV1 - Dynotest Mileage Blocker Mercedes V-Class W447 2015-2022 (Multicolor)

DNTMBV1 - Dynotest Mileage Blocker Mercedes V-Class W447 2015-2022 (Multicolor)

 

Product Information

SKU:

DNTMBV1 

This device is specifically designed for testing Mercedes V-Class W447 (Multicolor) cars.
It provides the capability to temporarily suspend (freeze) the odometer during car testing, preventing the accumulation of additional mileage.

Mercedes V-Class W447 car has 2 types of clusters.

This device is designed for a Multicolor cluster.

 

For more information, please visit the official product website: Dynotest

Device:
It is not intended to be used on public roads.
It is not intended for registered cars.

The Plug&Play technology eliminates the need for soldering during installation.

Information about the operation modes of the device on Mercedes V-Class W447 (Multicolor): 

The hazard warning light on the dashboard will blink each time when the device switches between modes.

Mode 1

Press the "RETURN " button or pull HIGH BEAM lever 3 times.
The hazard warning light will blink once.  
The mileage block function will be not active.

Mode 2

Press the "RETURN " button or pull HIGH BEAM lever 3 times.
The hazard warning light will blink twice.
The odometer will register 50 km for every 100 km driven .

Mode 3

Press the "RETURN " button or pull HIGH BEAM lever 3 times.
The hazard warning light will blink three times.
The odometer will register 2 km for every 100 km driven.

Mode 4

Press the "RETURN " button or pull HIGH BEAM lever 3 times.
The hazard warning light will blink four times.
The mileage block function will be FULL active.

Dashboard:                                                                    Button:

Important for successful installation and use:

  • During device connection/disconnection, the ignition must be turned off
  • Switching between modes should be done on a stationary car
  • When the device is in use, the selected mode will be retained (saved) after the ignition is turned off/on

Other, alternative product names searched for:

Mileage Blocker, Mileage Stopper, Odometer Stopper, Odometer Blocker, Mileage Correction, CAN Filter, CAN Blocker, Mileage Freezer, Odometer Freezer, CAN Freezer.

How to install:

DNTMBV1
New
No reviews

1 other product in the same category:

Customers who bought this product also bought:

Customers who bought this product also bought:

Product added to wishlist