MRTSETFP - MARTECH Full Pack Box III

Product Information 

SKU:

MRTSETFP

Full Pack Box III with all cables and activations

The possibilities of the programmer:

• Eeprom/Flash: spi, i2c (also X24c00), microwire (also rotated without need to change pins), spi flash series, f-ram, 77007MN, KKZ, (automatic pinout detection in General connexion mode)
• NEC (more types, faster connection)
• Motorola HC05/HC11 Motorola HC05L28
• ST92 (greater stability of operation, future reading of protected areas)
• Renesas M16/M32 (can read some protected versions)
• JTAG – new – Box III as JTAG programmer for many types of ARM 7/9 processors
• no pique encoding – everything can be saved as a binary file (simultaneous compatibility with .mbin)
• possibility of setting voltage Vreg, Rise Time, Ireg, read speed
• new user interface – easier and faster selection of models, functions
• possibility of powering external systems from the box
• Hardware and software support for most OBD protocols 
• programmable output current protection, Ireg

Box III technical data:

• DB25 diagnostic connector (inputs, outputs, TX232, RX232, CAN L, CAN H, K-Line, L-Line, Vreg, ADC-A, ADC-B)
• USB connector
• 9V power connector
• 4 LEDs (BUSY/ERROR, CONNECTION, RX, TX)
• firmware update box on the fly (in the background, changes occur after closing the program)
• install drivers directly from windows update xp/vista/win7/win8/win8.1
• automatic access to the Forum and purchased activations
• software installation description and connection schematics available in Help online
• 12 months warranty
• free support for purchased activations

Box III supports communication through:

• JTAG (e.g. LCN, RNS310, LSRNS, HSRNS, HSMCA, RNS300)
• OBD (K-Line, ALDL, OBD-I, OBD-1.5, OBD-II, EOBD, EoBD2, JOBD, ADR, SAE J1850 PWM, SAE J1850 VPW, ISO 9142-2)
• UART (RS232, TX232, RNS510)
• CAN L, CAN H, K-Line, L-Line, Vreg, ADC-A, ADC-B
• k-line level 1..15V (without external power, only from USB to 9V),
• l-line 1..15V (without external power, only from USB to 9V),
• RS232 TX/RX at -9.. 9V,
• RX/TX output 1..5V (USB)
• MBUS at the output TX
• MBUS on the RX output
• on universal outputs
• MAUS BUS (for cancheck after connection in BP radios)

The current set includes:

1. Cable and interface set

2. Martech BOX III

3. About RCD Tools

4. RCD PRO Tools

5. Activating Security Repairer

6. Audi Aisin RNSE-PU 2010

7. Ford TMS 470 Decoder activation

8. Activation of RNS 300 / LowLine Decoder

9. Activation of RNS310/HSRNS-Omap Decoder

10. BE2580 System activation

11. Activation of RNS510/810

12. Activation of the Emulator

13. Renesas Boot ID/Pass Finder activation

14. Activation of ST10 Flasher

15. Activation of the Ford CAN code reader

16. Activation of Motorola Protect Service

17. Activation of MMI 3G Recovery Tool

18. Activate the RNEG Recovery Tool

19. Activate the NG4 Recovery Tool

20. Activation of the Ford V8 program

21. Activation of VP1/2 Decoder

22. Chrysler SN Decoder Activation

23. How to activate NTG Unlocker

24. How to activate Qnx Explorer

25. Activation of the CODING TOOL OTV

26. Activation of the CODING TOOL CPD

27. Activation of DAICALC