Product Information
SKU:
CANEMU.2
Therapeutic device for care, e.g. mileage counter, coding and other functions, replacing the engine controller, meters (dashboard) with another used one.
CANEMU blocks communication between modules and sends the information we want.
Can can be used:
- in Mercedes S-class W221 2007+, new C-class and CLC W204 2008+, ML W164 2007+, GL X164 2007+, R-class W251 2007+, E-class W212 with NEC processor. CANEMU locks the counter value from EZS (EIS). If the CANEMU filter in EZS, the dealer workshop scanner (e.g. Mercedes StarDiagnosis or Xentry) will show the main odometer reading in EZS the same as on the odometer.
- in Mercedes ML 2012+ W166, new A and B classes W176, W246, W197, W447 with a NEC processor installed in the counter. CANEMU locks the odometer value from EZS (EIS). If a Mercedes CAN filter is installed, the dealer's workshop scanner (e.g. Mercedes StarDiagnosis or Xentry) will show the original odometer reading. CANEMU will only block DASH-EZS odometer synchronization.
- in Mercedes ML 2012+ W166, new A and B class W176, W246, W197, W447 installed in the OBDII connector. CANEMU locks the counter value from EZS (EIS) read by OBDII. If this CANEMU filter configuration is installed, the dealer's workshop scanner (such as Mercedes StarDiagnosis or Xentry) will show the main odometer reading in the EZS the same as in the odometer.
- in the BMW F Series CAS4. CANEMU locks the odometer value from CAS4 to the odometer and diagnostic testers. If CANEMU is installed in CAS4, the dealer workshop scanner (BMW ICOM or INPA) will show the main odometer reading in CAS4 the same as in the instrument cluster. Works with FBS3 and FBS4.
- in BMW F series with FEM: F20, F30, F31.
- in Reanult Laguna III 2008+, Scenic 4 2009+, Megane III 2009+. If CANEMU is installed in the meter, ABS programming is not needed. Just change the original km counter value on the dashboard.
- in BMW motorcycles manufactured since 2012. CANEMU will block the restoration of the KM counter value from the engine's ECU.
- in Harley Davidson CANEMU will block the restoration of the KM counter value from the engine's ECU.
CANEMU is tested on F01, F02 with 1L15Y processor, F10 and F07 (BMW GT) with 1L15Y and 5M48H processors and on F25 (new X3).
After installing CANEMU, the diagnostic tester (BMW ICOM or INPA) shows the same mileage in CAS4 as on the dashboard. Installation in the F20 FEM example:
Also works on older cars such as E-class W211, S-class W220, Sprinter. It can also be installed in the dashboard, but in this case the old odometer value will remain in EZS-EIS.
W204 installation example:
Useful links:
