Product Information
SKU:
SPEEDSTOPLAMBO4
For Lamborghini Gallardo (2007–2013) cars drive test or dyno test. While car drive test is possible to stop (freeze) odometer counting.
Plug and Play device with easiest connection way possible, no soldering is required in the installation process.
- Lamborghini Gallardo (2007–2013) with 32pin instrument cluster Green and Blue connector;
Plug and Play device with easiest connection way possible, no soldering is required in the installation process. Remove instrument cluster. Disconnect cluster green connector and swap green cover. Now connect SPEEDSTOP female connector to cluster - check position of pin1. SPEEDSTOP male connector connect to car cluster connector - check twice connectors orientation. Use additional cable ties for fixing connectors.
Activation with High Beam handle
The cruise control and other assistance systems works fine in all MODES;
Using SPEEDSTOP on Lamborghini Gallardo (2007–2013) cars: (speedometer pointer rise up (while driving only) every time when working mode are changed):
- Mode1: Push 4x High beam light switch (speedometer pointer rise up (while driving only) 1 time) = Odometer freezed (after 100 km will turn 10 km) , Speedometer show actual speed divided by 10 ;
- Mode2: Push 4x High beam light switch (speedometer pointer rise up (while driving only) 2 time) = Odometer freezed (after 100 km will turn 50 km), Speedometer show actual speed divided by 2;
- Push 4x High beam light switch (speedometer pointer rise up (while driving only) 3 time) = back to normal mode, Odometer and Speedometer works normal.
After Ignition OFF/ON SPEEDSTOP keeps selected working mode.
If you remove SPEEDSTOP adapter after test drive, odometer not changing.
