Product Information
SKU:
SPEEDSTOPLEX
For Lexus cars drive test or dyno test. While car drive test is possible to stop (freeze) odometer counting.
Plug and Play device with easiest connection way possible, no soldering is required in the installation process.
Works with :
- RX300, RX450H 2016-2019
- NX300, NX300H 2016-2019
- ES300, ES300H, ES350 2016-2019
- UX200 2017-2019
- LC500, LC500H 2016-2019
- LS500, LS500H 2017-2019
- RC300, RC350 RC F 2016-2019
- GS300, GS350, GS F 2015-2019
- IS300, IS350 2016-2019
Plug and Play device with easiest connection way possible, no soldering is required in the installation process. Remove instrument cluster. Disconnect cluster connector. Now connect SPEEDSTOP female connector to cluster. SPEEDSTOP male connector connect to car cluster connector.
Speedometer works correctly all time in SPEEDSTOP mode, just odometer not counting.
Using SPEEDSTOP on Lexus: (hazard indicator on speedometer blinks every time when working mode are changed):
- Push 4x High beam light switch (lights must be switched OFF) (High beam light on cluster will blink 1x ) = Odometer freezed, speedometer, cruise other functions works fine;
- Push 4x High beam light switch (lights must be switched OFF) (High beam light on cluster will blink 2x ) = SPEEDSTOP function is OFF, instrument cluster works like usually;
After Ignition OFF/ON SPEEDSTOP keeps selected working mode.
If you remove SPEEDSTOP adapter after test drive, odometer not changing.
