Product Information
SKU:
MN034
The MN034 FBS4 Personalization Expert license allows personalization of all virgin FBS4 modules. MN034 allows reading FBS4 data via OBD (or internal CAN-Bus connection) and personalization with or without available FBS4 data.
This is a major tool for working with modules from the FBS4-generation Mercedes-Benz vehicles. The MN032 DAS Manager for FBS4 vehicles license is required to use the MN034!
Functionalities:
- Reading FBS4 data from ALL types of modules via OBD (or internal CAN-Bus connection)
- Personalization with or without available FBS4 data from previous modules by internal CAN-Bus connection
- Personalization of brand-new and unused VGS4-0 NAG2 and VGS4-500 NAG2 transmission control units WITHOUT the need to set them to virgin state!
Supported modules:
VGS4-NAG2 (0 and 500)
- (DSM is used. Longitudinal engine config)
- Read FBS4 data via OBD: No need to open or cut the module!
- Set to virgin state (reset) only via ABPROG (or SET088) (MN035 and MN032 required!)
- Personalization via internal CAN-Bus connection (using FBS4 data from the previous module)
- Personalization WITHOUT available FBS4 data from the previous module via ABPROG/SET088
- Personalization of new and unused via internal CAN-Bus connection
- Reading and writing Config, SCN coding, EROTAN and EHS by OBD!
VGS-FDCT/VGS2-FDCT (FBS4)
- (Installed in transverse engine configurations)
- Reading and writing FBS4 data via OBD or internal CAN-Bus connection
- Setting to virgin state via ABRITES Distribution Box Set (ZN151) (MN032 required!)
- Personalization via internal CAN-Bus connection
- Personalization of new and unused via internal CAN-Bus connection
- Reading and writing Config, SCN coding, EROTAN and EHS by OBD!
VGS NAG3 (9G-Tronic transmission control units)
- (No DSM used. Longitudinal engine config)
- Reading FBS4 data via OBD or internal CAN-Bus connection
- Setting to virgin state via ABRITES Distribution Box Set (ZN151) (MN032 required!)
- Personalization via internal CAN-Bus connection
- Personalization of new and unused via internal CAN-Bus connection
- Reading and writing Config, SCN coding, EROTAN and EHS by OBD!
GT-DCT - AMG GT/AM Vantage (Transaxle config)
- Reading FBS4 data via OBD or internal CAN-Bus connection
- Reading and writing Config, SCN coding, EROTAN and EHS by OBD!
8 DCT (transverse engine config A- class and derivatives)
- Reading FBS4 data by OBD or internal CAN-Bus connection
- Personalization
- Reading and writing Config, SCN coding, EROTAN and EHS by OBD!
For ALL Engine modules:
- Reading FBS4 data by OBD or internal CAN-Bus connection (MN032 required!)
- Personalization for ALL ECU types by OBD or internal CAN-Bus connection! (Extended or Standard personalization)
- Personalization of MED17, EDC17, and CRD3 ECUs when NO PREVIOUS PERSONALIZATION DATA IS AVAILABLE!
- Setting to virgin state by OBD (MN032 required!) MED17, EDC17, SID310, CRD3 ECUs (CR40, CR41, CR42, CR43, CR6, CR60, CR61, MED40, MED177, MED1773, MED1775, CRR1, CRR1+, CRD3, CRD3S2)
- Setting to virgin state via ABRITES Distribution Box Set (ZN151) - required for MED41, MRD1, MRG1, CRR2 up to 2021 (MN032 required!)
Hybrid vehicle ECUs (INV20EM01 and derivatives)
- Reading FBS4 data by OBD or internal CAN-Bus connection (MN032 required!)
- Setting to virgin state via OBD or internal CAN-Bus connection – No need to open the module! (MN032 required!)
- Personalization by OBD or internal CAN-Bus connection (Extended or Standard personalization)
Electric vehicle ECUs (EM01, EM02)
- Reading FBS4 data by OBD or internal CAN-Bus connection (MN032 required!)
- Personalization by OBD or internal CAN-Bus connection (Extended or Standard personalization)
DSM (all types of models) installed in VGS4-NAG2 (7G) cars
- Reading and writing FBS4 data via internal CAN-Bus connection
- Setting to virgin state via internal CAN-Bus connection – No need to open the module! (MN032 required!)
- Personalization via internal CAN-Bus connection – No need to open the module! (MN032 required!)
- Personalization WITHOUT available FBS4 data from previous the module via ABPROG
Required hardware:
- AVDI – essential in order to use all ABRITES-based products and establish OBD connection
- ABRITES Distribution Box Set (ZN151) – required for setting selected modules to virgin state
- ABPROG or SET088 – required for setting VGS4-0 NAG2 and VGS4-500 NAG2 modules to virgin state and personalizing them without available FBS4 data from previously used module.
- DSM/ISM Direct CAN BUS Connection Cable (CB034) – required for reading, setting a used module to virgin state, and writing data onto it
- Mercedes-Benz MD1/MG1 ECU connection cable for FBS4 Manager and ECU Programming Tool (CB030)
- Extended Cable Set for all TCUs which require bench connection (CB403) – for owners of the ZN051 (older iteration of the Diastribution Box Set)
